Article Summary
Shelf clearance, published weight limits, and a door that closes decide a trophy display case purchase, not the finish in the photograph. The PEUKC 71-inch metal cabinet ranks first, with four adjustable shelves, a three-point lock, and a published 120-pound shelf load. Four of the six cases publish no interior dimension at all, and none of them publishes a UV rating. One narrow cabinet chassis sells under three brand names at 22, 11, and 7.7 pounds a shelf. Felt lining gives off tarnishing gases, per the Canadian Conservation Institute, so it works against a plated cup rather than protecting it. Measure your tallest trophy first, because shelf clearance rather than cabinet height decides the fit.
This article contains affiliate links. We earn a commission if you make a purchase, at no additional cost to you.
Shelf clearance, published weight limits, and whether the door closes decide this purchase, and my first choice is the PEUKC 71-inch metal cabinet. It has four adjustable shelves, a three-point lock, and a published shelf load of 120 pounds.
I rank on those three because most trophy display cases are sold on a photograph of a finished shelf, and almost none publish the number that decides whether your trophy fits inside. Four of the six below state no interior dimension anywhere. Of the 25 brands behind these listings, only five run a live site that sells this category, and the brand behind my top pick answers with an empty page. The other five picks are sorted by room, since a trophy was earned rather than bought and it should end up somewhere you’ll actually see it.
Trophy Display Cases at a Glance
| Product | Ranking | Form & Material | Key Specs (W x D x H) | Best For |
|---|---|---|---|---|
| PEUKC 71-Inch Metal Cabinet | 9/10 | Floor cabinet, steel frame, glass doors | 31.5 x 15.7 x 71 in; four adjustable shelves; 120 lb per shelf; lock | Tall trophies, growing collection |
| Aauro Home 5-Tier Glass Cabinet | 8.6/10 | Floor cabinet, metal frame, tempered glass | 29.5 x 13.8 x 64 in; five removable adjustable shelves; three-color LED | A living room |
| LFT HUIMEI2Y 4-Tier Cabinet | 8.5/10 | Floor tower, 5 mm tempered glass | 16.7 x 14.4 x 64.7 in; four fixed shelves; 22 lb per shelf; lock, anti-tip device | A corner under 17 in wide |
| SSWBasics Infinity Showcase | 8.3/10 | Countertop, quarter-inch tempered glass | 12.25 x 14.25 x 27.25 in; shelf bays of 8 3/8, 8 1/8, 8 3/8 in; lock | A desk or counter |
| Design Toscano Country Tuscan | 8.2/10 | Wall-mounted hardwood, mirrored back | About 19 x 8.5 x 26 in; three shelves at 15.75 x 6 in; 10 lb total | A wall, no floor to spare |
| HOPEME 8×12 Acrylic Trophy Case | 8.1/10 | Single-award box, 3 mm acrylic | 8 x 8 x 12 in outside; 7.78 x 7.78 x 11.89 in inside | One award, sealed |
My top pick is the only case rated above 22 pounds a shelf and the only floor cabinet with a three-point lock. There’s no UV column because none of these six publishes a UV rating, and nothing else in the category does.

How I Ranked These Trophy Display Cases
Six criteria decide the order, the same six I use on every case on this site: build quality, size and fit, visual appeal, safety and protection, ease of assembly, and value for money.
None of these cases was handled, assembled, or measured here. This is a spec-and-materials evaluation, and I’d rather say so plainly than dress it up. Every dimension, capacity, and material below comes from the seller’s current listing or the manufacturer’s own page. There’s no owner feedback behind any of it.
Amazon returned no star rating and no review count for any of the 39 listings I pulled through its Creators API on September 14, 2026, and it blocks automated access to review pages. So every criticism below comes from a published spec, a contradiction inside a listing, a number a seller won’t publish, or a conservation source.
Material carries a lot of the scoring, because a trophy is plated metal sitting in the case’s own air for years. Fully tempered glass has about four times the breakage strength of annealed glass, per the National Glass Association’s tempered glass bulletin, though most of the pane can fall out of the frame when it goes. Acrylic won’t shatter, but the Canadian Conservation Institute’s glazing materials note records that it scratches easily, holds an electrostatic charge, and needs 3 mm of thickness to avoid bowing. Wood looks best and gives off acidic vapors, which the CCI flags as a problem for copper alloys, the metal under most plating.
On UV, nobody in this category publishes a number. The CCI names Plexiglas UF-5, Acrylite OP-2, and OP-3 as the grades that genuinely filter ultraviolet light. None of these cases claims to use one. I won’t invent a percentage to fill the column.
Measure Your Tallest Trophy Before You Buy a Case
Crown Awards publishes classic column trophies at 10, 11, and 12 inches, a full column line running 10 to 26 inches, and riser trophies from 8 1/2 inches to 72 inches. Against that ladder, the only per-shelf clearance figure I found on any cabinet this year was 14.4 inches, on a TAMUNE case that’s currently unavailable. Cabinet height tells you nothing. Shelf clearance is the number, and four of my six picks don’t have one.

Weight is the second trap. Amazon’s recorded item weight for one 24-inch metal championship trophy is 6 pounds, so two of them on a 7.7-pound shelf already puts you over.
Those ratings are softer than they look. The same narrow cabinet ships under three brand names at near-identical dimensions with three different limits. LFT’s HUIMEI2Y lists 22 pounds a shelf at 64.7 x 16.7 x 14.4 inches, FANYUSHOW lists 11 pounds at 64.7 x 16.7 x 14 inches, and FLYMUHJIA lists 7.7 pounds at 64.2 x 16.9 x 14.6 inches.
Treat a published shelf load as a marketing input and leave yourself room.

Trophies arrive on a schedule nobody controls, so the shelf that fits this season is full by the end of the next. Adjustable shelf height is worth more than any finish, yet only two cases here have it.
Scale is the fit spec that decides model car display cases. Height is the one here.
1. PEUKC 71-Inch Metal Cabinet With Lock, Best Overall

Review
PEUKC’s tall steel cabinet is my first choice for a home collection, because it’s the only one here where a heavy cup on a middle shelf isn’t a question. The seller rates each of its four adjustable shelves at 120 pounds, against a next-highest figure of 22. It’s also the only floor cabinet here with a three-point lock, and at 71 inches the only pick with headroom above a 26-inch column trophy. Buy the PEUKC 71-Inch Metal Display Cabinet with Lock if your trophies are tall, heavy, or still arriving.
Overall Ranking
9/10
Individual Rankings
- Build Quality: 9.5/10
- Size & Fit: 10/10
- Visual Appeal: 8.5/10
- Safety & Protection: 8.5/10
- Ease of Assembly: 8/10
- Value for Money: 9.5/10
Stand-Out Features
- Exterior dimensions: 31.5 x 15.7 x 71 inches (W x D x H), 93 pounds
- Four adjustable shelves, each rated by the seller at 120 pounds
- Three-point door lock across two hinged doors
- Powder-coated frame the listing calls welded steel up to 8 mm thick
Pros & Cons
Pros
- Highest published shelf load here at 120 pounds, against 22 for the runner-up
- Shelf height moves, so the layout survives the next trophy
- The only floor cabinet in this group with a three-point lock
Cons
- The listing calls the doors tempered glass in one bullet and acrylic in another, and those materials fail in completely different ways
- No anti-tip device is mentioned on a 93-pound, 71-inch cabinet
- No interior clearance published, so bay height is a guess until delivery
- No lighting in the box
Alternatives
Two people are recommended for assembly, so if that’s a problem the LFT tower below claims a 30-minute build. If it has to read as furniture, take the Aauro Home unit.
2. Aauro Home 5-Tier Glass Cabinet, Best for a Living Room

Review
Five glass shelves that lift out and move make Aauro Home’s cabinet the one I’d put in a living room, because pulling a single shelf turns two short bays into one tall bay for a 20-inch trophy. Each door is one sheet of tempered glass with no frame crossing the sightline, and the LED runs three colors on a motion sensor. The Aauro Home 5-Tier Glass Display Cabinet is the pick that reads as furniture rather than as a fixture.
Overall Ranking
8.6/10
Individual Rankings
- Build Quality: 9/10
- Size & Fit: 8.5/10
- Visual Appeal: 9.5/10
- Safety & Protection: 7/10
- Ease of Assembly: 8.5/10
- Value for Money: 9/10
Stand-Out Features
- Exterior dimensions: 29.5 x 13.8 x 64 inches (W x D x H), 80 pounds, on 5.3-inch legs
- Five tempered-glass shelves, removable and height-adjustable
- Full-view doors on spring-loaded push latches
- Three-color LED strips in white, warm white, and blue, with a motion sensor
- Metal frame with an FSC-certified wood back panel
Pros & Cons
Pros
- Shelves come all the way out, which is how you get one tall bay
- No frame crosses the glass, so nothing interrupts the view
- Lighting is built in, and LED is the correct lamp for a closed case
Cons
- Publishes no weight limit at all, per shelf or total, on a unit whose entire load path is glass
- Push latches instead of a lock, so nothing stops a guest opening it
- No anti-tip device mentioned on an 80-pound, 64-inch cabinet
- No interior clearance published, and no assembly time or person count
Alternatives
The PEUKC cabinet above is the one to take if a lock matters more than looks, since it carries the three-point mechanism. The LFT tower gets you a lock in a narrower footprint.
3. LFT HUIMEI2Y 4-Tier Cabinet With Lock, Best for a Narrow Corner

Review
A corner, or the gap beside a desk, is where the LFT HUIMEI2Y tower goes, and at 16.7 inches wide it’s the cabinet I’d buy for exactly that job. It locks, it ships with an anti-tip device, and the seller rates each of its four 5 mm tempered-glass shelves at 22 pounds. The LFT HUIMEI2Y 4-Tier Glass Display Cabinet with Lock also claims a 30-minute assembly, the fastest published build in this group.
Overall Ranking
8.5/10
Individual Rankings
- Build Quality: 8.5/10
- Size & Fit: 8/10
- Visual Appeal: 7.5/10
- Safety & Protection: 8.5/10
- Ease of Assembly: 9.5/10
- Value for Money: 9/10
Stand-Out Features
- Exterior dimensions: 16.7 x 14.4 x 64.7 inches (W x D x H)
- Four shelves in 5 mm tempered glass, each rated by the seller at 22 pounds
- Lockable single door plus an included anti-tip device
- Assembly claimed at 30 minutes
Pros & Cons
Pros
- Fits a footprint under 17 inches wide
- Lock and anti-tip device both included
- Highest published shelf rating among the narrow towers
Cons
- The 22 isn’t a number to load against, given what the same chassis publishes under its other two brand names
- No lighting at all, so a lit display is a second purchase and a wiring job
- Shelves aren’t stated to be adjustable
- No interior clearance published
Alternatives
FANYUSHOW 4-Tier Display Cabinet with LED is the same chassis with a remote-controlled 13-color LED, at a published 11 pounds a shelf. FLYMUHJIA sells the open, doorless version, and I’d skip it, because no door means no seal and no lock.
4. SSWBasics Infinity Countertop Showcase, Best Tabletop Case

Review
Three shelf bays of 8 3/8, 8 1/8, and 8 3/8 inches are published before you buy, which is most of the reason this countertop showcase made the list. SSWBasics’ Infinity case uses quarter-inch tempered glass against the LFT tower’s published 5 mm, with a lock and key as standard. The SSWBasics Infinity Countertop Showcase is what I’d put on an office credenza or a workshop counter with no floor to give up.
Overall Ranking
8.3/10
Individual Rankings
- Build Quality: 9.5/10
- Size & Fit: 7.5/10
- Visual Appeal: 8/10
- Safety & Protection: 8.5/10
- Ease of Assembly: 9/10
- Value for Money: 7.5/10
Stand-Out Features
- Exterior dimensions: 12.25 x 14.25 x 27.25 inches (W x D x H)
- Quarter-inch tempered glass, the thickest glazing of any pick here
- Lock and key included
- Three removable shelves with published spacing of 8 3/8, 8 1/8, and 8 3/8 inches
- Ships ready to assemble
Pros & Cons
Pros
- Publishes its shelf spacing, so a tape measure settles the fit question
- Quarter-inch glass with a lock as standard equipment
- Deep enough at 14.25 inches for a real award, small enough for a counter
Cons
- Shelves come out but don’t move, so your only heights are about 8 or about 16 1/2 inches
- A standard 10-inch column trophy won’t stand in any bay as delivered
- No lighting
- Priced as retail store equipment rather than as a home accessory
Alternatives
Move up to the HOPEME case below when the award is taller than a bay here allows, since it states its interior height. A wall case frees the counter entirely if the awards are flat, medals and plaques rather than cups.
5. Design Toscano Country Tuscan Wall Curio, Best Wall-Mounted

Review
Hanging a trophy case on a wall costs you load capacity, and Design Toscano’s Country Tuscan curio is the one I’d accept that trade on. At about 8.5 inches it’s the deepest home-scale wall case I found, and depth is the whole problem with wall-mounted trophy cases. This one is hardwood with glass side panels and a mirrored back, so the award reads from three angles. The Design Toscano Country Tuscan Wall Curio Cabinet suits a hallway or a home office with no floor to spare.
Overall Ranking
8.2/10
Individual Rankings
- Build Quality: 9/10
- Size & Fit: 6.5/10
- Visual Appeal: 9/10
- Safety & Protection: 7/10
- Ease of Assembly: 9.5/10
- Value for Money: 8/10
Stand-Out Features
- Exterior dimensions: about 19 x 8.5 x 26 inches (W x D x H), though the maker’s own pages disagree
- Three removable glass shelves at 15.75 x 6 inches each, published on Design Toscano’s own page
- Hardwood carcass, two framed glass doors, glass sides, mirrored back
- Wall-mounting hardware included; no lock
Pros & Cons
Pros
- Deep enough for an actual trophy, which almost no wall case is
- Shelf dimensions and a weight limit are both published
- Arrives assembled, so the job is mounting it
Cons
- The 10-pound limit covers the whole cabinet, and one 24-inch metal trophy weighs 6 pounds
- The maker’s two pages transpose width and depth, and one prints the cabinet’s own weight as 22 pounds in the spec table and 18 in the description
- Amazon’s recorded item dimensions give a third width again, while the listing itself publishes no specifications at all, so every number here came off the maker’s site
- Hardwood gives off acidic vapors, and plated trophies sit on one of the metals most affected
- No lock
Alternatives
Design Toscano’s Amesbury Manor is the same idea at 17 x 6 x 22.5 inches with two shelves and the same 10-pound ceiling. For anything heavier, go back to a floor cabinet.
6. HOPEME 8×12 Acrylic Trophy Case, Best for One Award

Review
11.89 inches of interior height is what makes this case worth buying, because you can check it against the trophy on your shelf before you spend a dollar. HOPEME publishes its inside and outside dimensions side by side, and it’s the only case here that does. The HOPEME 8×12 Acrylic Trophy Case is a 3 mm acrylic box on a matte black base, and it’s the cheapest thing here by a wide margin.
Overall Ranking
8.1/10
Individual Rankings
- Build Quality: 7.5/10
- Size & Fit: 7/10
- Visual Appeal: 8/10
- Safety & Protection: 7.5/10
- Ease of Assembly: 9/10
- Value for Money: 9.5/10
Stand-Out Features
- Interior dimensions: 7.78 x 7.78 x 11.89 inches (W x D x H)
- Exterior dimensions: 8 x 8 x 12 inches (W x D x H), 2.95 pounds
- 1/8-inch (3 mm) acrylic, which the seller puts at 95% light transmittance
- Matte black base with a lift-off lid
- Ships flat with an illustrated instruction sheet and a tool kit
Pros & Cons
Pros
- Publishes the interior measurement, so the fit question is settled before you buy
- Cheapest pick here and the only one that isn’t furniture
- The lid closes over the award, which keeps daily dust off the plating
Cons
- 11.89 inches clears a 10 or 11-inch trophy and stops dead at a 12-inch one
- 3 mm is the minimum acrylic thickness that avoids bowing, not a margin above it
- Acrylic holds a static charge that pulls dust onto the outside, and solvent cleaners can craze it
- The seller calls it “almost 100% dust proof” without publishing an air-exchange figure
- No lock and no lighting
Alternatives
If the trophy is taller than 11.89 inches, BenchPro Acrylic Display Case with Wood Base is the next step up at 20 inches tall. It publishes no interior figure, so how much of that height you get is unknown until it arrives.
Floor-Standing, Wall-Mounted, and Tabletop Trophy Cases
Floor-Standing Trophy Cases
A floor cabinet holds the most, costs the most square footage, and has to be anchored. The Consumer Product Safety Commission’s 2023 tip-over report records an estimated annual average of 17,800 emergency-department-treated tip-over injuries between 2020 and 2022, plus 217 reported fatalities over the separate period from 2013 to 2023. The federal stability rule, 16 CFR 1261, covers clothing storage units, so a glass display cabinet falls outside it. The strap in the box is the whole safety system, and two of my six picks don’t mention one.
Door type is the other thing the catalogs split on, but none of the six picks above uses sliding glass. Between them the floor cabinets run two hinged doors, one hinged door, and push-latch full-view doors, with a lift-off lid on the single-award box. Sliding glass is mostly a fixture-tier fitting, and it turns up in the priced units beside this search on a wall case from a store-fixture supplier. What decides it for a plated trophy is whether the door seals rather than how it opens, though no case in this category publishes an air-exchange figure either way.
Wall-Mounted Trophy Cases
Wall-mounted cases save the floor and cost you depth. The wall curios I screened mostly run 3 to 4 inches deep with shelves rated around 4.4 pounds, which holds a medal but no trophy. Renters should read 3M’s instructions first.
Command Large picture-hanging strips hold 3.6 kg with two pairs and 7.2 kg with four, and the same sheet says they’re not recommended for shelves and shouldn’t hold anything irreplaceable. A loaded wall case needs studs or a heavy-duty toggle.
Tabletop and Single-Award Trophy Cases
Tabletop and single-award cases ask nothing of the wall or the floor and cap out early on height. They’re right for one award and wrong by the third. If the award is a statuette rather than a cup, footprint matters more than height, which is what statue and figurine display cases are sized around. If model cars share the shelf, diecast display cases size their compartments for it.
Trophy Display Cases for Home, School, and Office
A school hallway case and a home cabinet answer to the same search term and are not the same purchase.
Trophy Display Cases for Home
Home is what the six picks above are for, and the spend sits in furniture territory rather than fixture territory. What separates a home cabinet from a hallway fixture is who opens it, and a den or a kid’s room wants adjustable shelves and a door that closes rather than the anti-theft hardware an institution specifies.
Trophy Display Cases for School
School is a different aisle, and the reason is written into building code rather than any catalog. Under §307.2 of the Department of Justice’s 2010 ADA Standards, an object with a leading edge between 27 and 80 inches above the floor may protrude no more than 4 inches into a circulation path.
A case deep enough to hold a trophy is already deeper than that. The U.S. Access Board’s guide to protruding objects gives the two compliant answers, which are recessing the case into an alcove or adding a side partition whose bottom edge sits no higher than 27 inches.
Price follows the same split. The 20 priced units Google lists beside this search run from roughly $200 to just under $4,000. None of them is an Amazon product.
Store Fixtures Direct, Creative Store Solutions, School Outfitters, and Modern Office carry the four-figure end. If you’re outfitting a hallway, that’s your supplier list, and I don’t have a pick to sell you there.
Trophy Display Cases for Office
Lockability is most of what the institutional tier buys, and it’s the piece worth borrowing for an office lobby. The National Park Service’s museum security handbook sets the real bar, which is bolt throws at least one inch long and captive keys that can’t be pulled while the lock is open, and it names warded locks, spring latches, key-in-knob locks, short deadbolts, and padlocks as things not to rely on. No consumer case here meets it, including my own top pick with its three-point lock. An office lobby lands between the home cabinet and the hallway fixture, where a locking countertop showcase or a wall curio does honest work.
How to Display a Trophy at Home
Keep the case off a windowsill, away from a bathroom wall, and clear of a radiator, and most of the rest takes care of itself.
Dust is the daily job, and a door that closes is what reduces it. The Canadian Conservation Institute’s airtightness bulletin grades an enclosure at one air exchange a day as moderately sealed, 0.3 as well sealed, and 0.1 or less as very well sealed. Even at one exchange a day, coarse dust settles inside at about a quarter of the outside rate. None of these cases publishes an air-exchange figure, so “dust proof” on a listing is a sales line rather than a measurement.
Tarnish is the slower job and the one that does permanent damage. The CCI’s silver care note puts prevention inside a sealed case ahead of removal, because on a plated object any tarnish removal can be very damaging and each polish takes away some of the underlying metal. In a museum setting a dark layer takes months or years to form, per CCI’s separate note on silver tarnish, so it’s a slow problem you win by leaving the trophy alone.
Felt lining deserves a warning, because it gets sold as a premium touch. The CCI’s note on storing metals lists wool and felt beside rubber and certain paints as materials that give off tarnishing gases, and its recommendation is closed, sealed storage. A felt deck under a plated cup works against the plating.
Light is the easiest call. White LED emits 0 to 75 µW/lm of ultraviolet, which the CCI’s light and UV table rates very low and marks as needing no UV filter, against 300 to 600 for daylight, and it puts no heat into the beam. That makes LED the only sensible lamp inside a closed case, so paying extra for built-in lighting buys visibility rather than protection.
Sidelights and a mirrored back are the other two visibility features this category sells. The Design Toscano curio’s mirror makes one award read from three angles and costs the trophy nothing, while a sidelight is one more lamp inside a closed box and has to clear the same heat question the CCI table already settles in LED’s favor.
Handle the trophy as little as you can, since CCI’s guidance on metal objects records that fingerprints carry salts and oils onto the plating. Certificates and signed photos lie flat and do better in jersey and memorabilia display cases than propped on a shelf.
Which Trophy Display Case to Buy for Your Setting
For tall, heavy trophies with more on the way, the PEUKC 71-inch metal cabinet is my pick, and the adjustable shelves are why. For a living room, the Aauro Home 5-tier gives you removable shelves and built-in LED, if you can live without a published weight limit. For a corner under 17 inches, the LFT HUIMEI2Y tower locks and anchors, and you should load it conservatively.
For a desk or an office credenza, the SSWBasics Infinity showcase tells you its shelf spacing in advance. For a wall with no floor to give, the Design Toscano Country Tuscan curio is a real trophy case inside a 10-pound ceiling. For one award sealed away from dust, the HOPEME acrylic case publishes its interior height.
Measure the tallest one first. Whatever’s going in there took somebody a season to earn, and a shelf an inch too short is the thing you’ll notice every time you walk past it.
Frequently Asked Questions About Trophy Display Cases
What is a trophy case called?
A trophy case is also called a trophy cabinet, a trophy showcase, an award display case, or a curio cabinet, and sellers use all of those terms for the same product. The names don’t map to different designs, which is why Google’s shopping results for this term mix a $200 home cabinet with a fixture-retailer showcase just under $4,000. Shop on the shape you need rather than on the noun in the title.
Do trophy display cases come assembled?
Most trophy display cases don’t arrive assembled, and the effort varies more than the listings admit. The PEUKC 71-Inch Metal Display Cabinet with Lock recommends two people, LFT HUIMEI2Y 4-Tier Glass Display Cabinet with Lock claims a 30-minute build, Aauro Home 5-Tier Glass Display Cabinet ships numbered parts with no time estimate, and SSWBasics Infinity Countertop Showcase arrives ready to assemble. The Design Toscano Country Tuscan Wall Curio Cabinet comes built, so the job is mounting it. Custom sizing isn’t a retail option, so if nothing stock fits, that’s a fixture supplier’s job.
What size trophy display case do I need?
The size you need is whatever clears your tallest trophy on one shelf. Measure the trophy, add an inch, and shop on shelf clearance rather than on the cabinet’s overall height. For a single award up to about 11 inches, the HOPEME 8×12 Acrylic Trophy Case publishes an 11.89-inch interior you can check in advance. For tall cups with more on the way, the PEUKC 71-Inch Metal Display Cabinet with Lock has four adjustable shelves and the most headroom here.
How do I build a trophy case?
You build a trophy case by solving the two things a bought one solves, which are a shelf that won’t sag under loaded cups and glazing that won’t craze later. The best advice I found is a 2001 Fine Woodworking thread from a parent building one for a Cub Scout pack: add a vertical partition mid-span so the shelf doesn’t sag, and use tempered glass or plexiglass at floor level. If you’re cutting acrylic, ACRYLITE’s fabrication manual says to anneal the sheet at 180°F for one hour per millimeter of thickness. Skipping that is why home-built boxes craze when they meet glass cleaner, and it’s also why a build only comes out cheaper when you do the whole job properly.
What are the best card display cases for trading cards?
Trading cards need slab-sized holders rather than a trophy shelf, because a graded card is flat and thin and the depth that suits a cup is wasted. Fit still catches people out. Ultra PRO’s ONE-TOUCH wall display holds magnetic holders up to 35pt, so a thicker 130pt slab won’t go in. Check the point rating on your holders first.
How do you keep trophies from tarnishing in a display case?
You slow tarnish by keeping the trophy behind a door that closes, keeping the room dry, and not polishing it. A sealed case holds back the tarnishing gases, which is why the Canadian Conservation Institute puts prevention ahead of removal on plated metal. Skip felt or wool lining under a plated cup, and handle it as little as you can.